How To Install Citrix XEN Server 7.2.0

Citrix XEN Server is an open source virtualization environment on small or large area. At first you can download Citrix XEN Server from official web site for any version.  Then follow step by step installation guide for using CITRIX virtualization.  Xen Server is an operating system then start installation process.

★ How To Install OsTicket On Ubuntu 16.04

★ How To Install WordPress (CMS) on Ubuntu 16.04

Preparation:

Ready to your server connect to LAN

Ready to your server connect to WAN

Create bootable image on your pen drive using rufuse.

Step #01: Then start your server power button and continue press f11 or f7 for attach boot file. When start your server now show Welcome to XenServer.

–  To install or upgrade press the <ENTER> key.

You can see “localhost login: root (automatic login)

Please select the keymap you would like to use: <press Enter>

Example image below:

End user License Agreement : Accept EULA

Press enter now see your virtual Machine Storage as like sda or sdb and “Enable thin provisioning (Optimized storage for XenDesktop)”. So select to tab and press spacebar then press enter.

Step #02: Select Installation Source “Local media” press enter. Supplemental Packs select No press enter.

Verify Installation source select Skip verification press enter.

Set Password as root user: Enter two passowrd

Select Networking eth0 or eth1 as LAN network select

() Automatic configuration (DHCP)

(*) Static configuration :

IP Address : 10.55.150.10

Subnet mask : 255.255.0.0

Gateway : 10.55.10.1

Step #03: Hostname and DNS Configuration

DNS Server 1 : 10.55.20.1

Then press Enter select your location and city again press Enter

Step #04: NTP Configuration select Using NTP press Enter

NTP Server 1 : pool.ntp.org

Confirm Installation select Install XenServer press Enter. You can see my first video. 

Message show Working : Please wait…

Step #05: Installation complete image below:

Goto your browser and type your XEN Server ip as like follow thus step:

http://10.66.200.20/

Click Xen Center Installer then download and run software. Installation process as like software installing.

Welcome to the Citrix XenCenter Setup Wizard

After installation process complete then open XEN center and connect your XEN Server

Manage your XEN Server

Once XenCenter is open, click the Add New Server button to connect to your XenServer host type details below.

Server IP : 10.66.200.20

User Name : root

Password : *****

Congratulations! You have successfully installed XenServer and XenCenter. Now enjoy your virtual environment and share to another.

If face any problem then see my YouTube video and Subscribe my channel. Please subscribe my channel for more update.